Rad Power Bikes Radster Road Charger
The Rad Power Bikes Radster Road uses Rad Power Bikes's own charger. Match the plug on your old charger's label.
You need:
Rad Power Bikes's own charger
Charger
Rad Battery Charger (MY2025)
More details
- Output
- Check the output on your old charger's label.
- Plug
- Rad MY2025
- Type
- External brick
- Notes
- Newer platform: check the model year on your frame sticker.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide
Specs
| Brand | Rad Power Bikes |
|---|---|
| Type | E-bike |
| Battery voltage | MY2025 |
| Charger output | Check the output on your old charger's label. |
| Plug/connector | Rad MY2025 |
| Match | Plug not confirmed |
Common questions
Can I use a universal charger on the Radster Road?
A universal charger is not recommended. Use the charger made for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Rad Power Bikes Radster Road?
Rad Power Bikes's official store has the charger shown on this page.
Other Rad Power Bikes models
- RadRunner 1RadRunner 148V · 54.6V 2ACheck your charger's label
- RadRunner 2RadRunner 248V · 54.6V 2ACheck your charger's label
- RadRunner PlusRadRunner Plus48V · 54.6V 2ACheck your charger's label
- RadRunner 3 PlusRadRunner 3 Plus48V · 54.6V 2ACheck your charger's label
- RadCity 3RadCity 348V · 54.6V 2ACheck your charger's label
- RadCity 4RadCity 448V · 54.6V 2ACheck your charger's label