✓ Store links checked regularly.

eBike Charger Finder

Rad Power Bikes RadCity 3 Charger

The Rad Power Bikes RadCity 3 uses a 54.6V 2A charger. Match the plug on your old charger's label.

You need:

A 54.6V 2A charger

Rad Power Bikes RadCity 3

Charger

Rad Power Bikes 48V charger

More details
Output
54.6V 2A
Plug
Rad-specific (varies by model year)
Type
External brick
Notes
54.6V 2A output.
Official Rad Power Bikes charger
All models that use this charger

We may earn a small commission if you buy through these links, at no extra cost to you.

Stock changes often, so availability may vary by store.

Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide

Look for the UL mark on your charger's label.

Specs

BrandRad Power Bikes
TypeE-bike
Battery voltage48V
Charger output54.6V 2A
Plug/connectorRad-specific (varies by model year)
MatchPlug not confirmed
Common questions
Can I use a universal charger on the RadCity 3?

No. A universal charger may have the wrong output or connector for this model.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Rad Power Bikes RadCity 3?

Rad Power Bikes's official store has the charger shown on this page.

Other Rad Power Bikes models