Rad Power Bikes RadRhino Charger
The Rad Power Bikes RadRhino uses a 54.6V 2A charger. Match the plug on your old charger's label.
You need:
A 54.6V 2A charger
Charger
Rad Power Bikes 48V charger
More details
- Output
- 54.6V 2A
- Plug
- Rad-specific (varies by model year)
- Type
- External brick
- Notes
- 54.6V 2A output.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide
Specs
| Brand | Rad Power Bikes |
|---|---|
| Type | E-bike |
| Battery voltage | 48V |
| Charger output | 54.6V 2A |
| Plug/connector | Rad-specific (varies by model year) |
| Match | Plug not confirmed |
Common questions
Can I use a universal charger on the RadRhino?
No. A universal charger may have the wrong output or connector for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Rad Power Bikes RadRhino?
Rad Power Bikes's official store has the charger shown on this page.
Other Rad Power Bikes models
- RadRunner 1RadRunner 148V · 54.6V 2ACheck your charger's label
- RadRunner 2RadRunner 248V · 54.6V 2ACheck your charger's label
- RadRunner PlusRadRunner Plus48V · 54.6V 2ACheck your charger's label
- RadRunner 3 PlusRadRunner 3 Plus48V · 54.6V 2ACheck your charger's label
- RadCity 3RadCity 348V · 54.6V 2ACheck your charger's label
- RadCity 4RadCity 448V · 54.6V 2ACheck your charger's label