Swagtron SwagCycle SC-1 Charger
The Swagtron SwagCycle SC-1 uses a 42V 2A charger. Match the plug on your old charger's label.
You need:
A 42V 2A charger
Swagtron SwagCycle SC-1
Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide
Look for the UL mark on your charger's label.
Specs
| Brand | Swagtron |
|---|---|
| Type | E-bike |
| Battery voltage | 36V |
| Charger output | 42V 2A |
| Plug/connector | DC 5.5x2.1/2.5mm barrel |
| Match | Plug not confirmed |
Common questions
Can I use a universal charger on the SwagCycle SC-1?
No. A universal charger may have the wrong output or connector for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Swagtron SwagCycle SC-1?
No store link is listed for this model.