✓ Store links checked regularly.

eBike Charger Finder

Ride1Up 500 Series Charger

The Ride1Up 500 Series uses a 54.6V charger with a Ride1Up plug.

You need:

A 54.6V charger with a Ride1Up plug

Tip: Voltage must match; amps can be equal or lower.

Ride1Up 500 Series

Charger

Ride1Up 48V charger

More details
Output
54.6V
Plug
Ride1Up
Type
External brick
Official Ride1Up charger

Compatible alternatives (not made by Ride1Up)

Compatible charger at ChargerbuyCompatible charger on eBay

Matched by voltage, output and plug. Questions about fit? Ask the seller before buying.

All models that use this charger

We may earn a small commission if you buy through these links, at no extra cost to you.

Stock changes often, so availability may vary by store.

Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide

Look for the UL mark on your charger's label.

Specs

BrandRide1Up
TypeE-bike
Battery voltage48V
Charger output54.6V
Plug/connectorRide1Up
Match✓ Confirmed match
Common questions
Can I use a universal charger on the 500 Series?

Only use one that outputs 54.6V and has the Ride1Up plug. Never use a charger with a different voltage.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Ride1Up 500 Series?

Ride1Up's official store, eBay, or the other store listed above have the charger shown on this page.

Other Ride1Up models