Pedego City Commuter Charger
The Pedego City Commuter uses a 54.6V or 58.8V 4A charger with a 3-pin XLR plug. Match the plug on your old charger's label.
You need:
A 54.6V or 58.8V 4A charger
Charger
Pedego Supercharger 4A (XLR)
More details
- Output
- 54.6V or 58.8V 4A
- Plug
- 3-pin XLR
- Type
- External brick
- Notes
- Check whether your battery label says 48V or 52V.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide
Specs
| Brand | Pedego |
|---|---|
| Type | E-bike |
| Battery voltage | 48V/52V |
| Charger output | 54.6V or 58.8V 4A |
| Plug/connector | 3-pin XLR |
| Match | Plug not confirmed |
Common questions
Can I use a universal charger on the City Commuter?
No. A universal charger may have the wrong output or connector for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Pedego City Commuter?
Pedego's official store has the charger shown on this page.