Juiced Bikes RipCurrent Charger
The Juiced Bikes RipCurrent uses a 58.8V 2–3A charger. Match the plug on your old charger's label.
You need:
A 58.8V 2–3A charger
Juiced Bikes RipCurrent
Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide
Look for the UL mark on your charger's label.
Specs
| Brand | Juiced Bikes |
|---|---|
| Type | E-bike |
| Battery voltage | 52V |
| Charger output | 58.8V 2–3A |
| Plug/connector | 3-pin XLR |
| Match | Plug not confirmed |
Common questions
Can I use a universal charger on the RipCurrent?
No. A universal charger may have the wrong output or connector for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Juiced Bikes RipCurrent?
No store link is listed for this model.
Other Juiced Bikes models
- CrossCurrent S2CrossCurrent S252V · 58.8V 2–3ACheck your charger's label
- CrossCurrent XCrossCurrent X52V · 58.8V 2–3ACheck your charger's label
- RipCurrent SRipCurrent S52V · 58.8V 2–3ACheck your charger's label
- HyperScorpionHyperScorpion52V · 58.8V 2–3ACheck your charger's label
- HyperScrambler 2HyperScrambler 252V · 58.8V 2–3ACheck your charger's label
- CityScramblerCityScrambler52V · 58.8V 2–3ACheck your charger's label