Gotrax Elevation Charger
The Gotrax Elevation uses Gotrax's own charger. Match the plug on your old charger's label.
You need:
Gotrax's own charger
Charger
Brand original charger (model-specific)
More details
- Output
- Check the output on your old charger's label.
- Varies by model.
- Type
- External brick
- Notes
- Model-specific original charger.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide
Specs
| Brand | Gotrax |
|---|---|
| Type | E-bike |
| Battery voltage | original |
| Charger output | Check the output on your old charger's label. |
| Varies by model. | |
| Match | Plug not confirmed |
Common questions
Can I use a universal charger on the Elevation?
A universal charger is not recommended. Use the charger made for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Gotrax Elevation?
Gotrax's official store has the charger shown on this page.
Other Gotrax models
- F2F248V · 54.6V 2ACheck your charger's label
- F2 V2F2 V248V · 54.6V 2ACheck your charger's label
- Z4 ProZ4 Pro48V · 54.6V 2ACheck your charger's label
- RangerRanger48V · 54.6V 2ACheck your charger's label
- AlpineAlpine48V · 54.6V 2ACheck your charger's label
- RamboRambo48V · 54.6V 2ACheck your charger's label