✓ Store links checked regularly.

eBike Charger Finder

Gotrax D1RT Charger

The Gotrax D1RT uses a 42V 2A charger. Match the plug on your old charger's label.

You need:

A 42V 2A charger

Gotrax D1RT

Charger

36V e-bike charger (42V)

More details
Output
42V 2A
Plug
DC 5.5x2.1/2.5mm barrel
Type
External brick
Official Gotrax charger
All models that use this charger

We may earn a small commission if you buy through these links, at no extra cost to you.

Stock changes often, so availability may vary by store.

Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide

Look for the UL mark on your charger's label.

Specs

BrandGotrax
TypeE-bike
Battery voltage36V
Charger output42V 2A
Plug/connectorDC 5.5x2.1/2.5mm barrel
MatchPlug not confirmed
Common questions
Can I use a universal charger on the D1RT?

No. A universal charger may have the wrong output or connector for this model.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Gotrax D1RT?

Gotrax's official store has the charger shown on this page.

Other Gotrax models