✓ Store links checked regularly.

eBike Charger Finder

Giant Quick-E+ Charger

The Giant Quick-E+ uses the Giant EnergyPak system, so it needs a Giant EnergyPak charger. Generic chargers don't fit.

You need:

A Giant EnergyPak charger made for your battery

Giant Quick-E+

Charger

Giant / Liv EnergyPak Smart Charger

More details
Output
36V 4A (6A for integrated)
Plug
Giant 5-pin
Type
External brick
Notes
EnergyPak Smart Charger (4A; 6A for integrated battery)
Official Giant charger
All models that use this charger

We may earn a small commission if you buy through these links, at no extra cost to you.

Stock changes often, so availability may vary by store.

Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide

Look for the UL mark on your charger's label.

Specs

BrandGiant
TypeE-bike
Battery voltageEnergyPak
Charger output36V 4A (6A for integrated)
Plug/connectorGiant 5-pin
MatchPlug not confirmed
Common questions
Can I use a universal charger on the Quick-E+?

No. The Quick-E+ uses the Giant EnergyPak system and needs a Giant EnergyPak charger. Generic chargers don't fit.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Giant Quick-E+?

Giant's official store has the charger shown on this page.

Other Giant models