✓ Store links checked regularly.

eBike Charger Finder

Engwe Engine X Charger

The Engwe Engine X uses a 54.6V 3A charger with a Engwe plug. Match the plug on your old charger's label.

You need:

A 54.6V 3A charger

Engwe Engine X

Charger

Engwe 48V charger

More details
Output
54.6V 3A
Plug
Engwe
Type
External brick
Notes
54.6V 3A output.
Official Engwe charger
All models that use this charger

We may earn a small commission if you buy through these links, at no extra cost to you.

Stock changes often, so availability may vary by store.

Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide

Look for the UL mark on your charger's label.

Specs

BrandEngwe
TypeE-bike
Battery voltage48V
Charger output54.6V 3A
Plug/connectorEngwe
MatchPlug not confirmed
Common questions
Can I use a universal charger on the Engine X?

No. A universal charger may have the wrong output or connector for this model.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Engwe Engine X?

Engwe's official store has the charger shown on this page.

Other Engwe models