Aventon Level Charger
The Aventon Level uses a 54.6V 3A charger with a Aventon (older platform) plug.
You need:
A 54.6V 3A charger with a Aventon (older platform) plug
Tip: Voltage must match; amps can be equal or lower.
Charger
Aventon 48V 3A charger (Gen 1–2 platform)
More details
- Output
- 54.6V 3A
- Plug
- Aventon (older platform)
- Type
- External brick
Compatible alternatives (not made by Aventon)
Matched by voltage, output and plug. Questions about fit? Ask the seller before buying.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Match the voltage on your old charger's label. 36V batteries use 42V chargers, 48V use 54.6V and 52V use 58.8V. These can share the same plug, so check the volts before you buy. Voltage guide
Specs
| Brand | Aventon |
|---|---|
| Type | E-bike |
| Battery voltage | 48V |
| Charger output | 54.6V 3A |
| Plug/connector | Aventon (older platform) |
| Match | ✓ Confirmed match |
Common questions
Can I use a universal charger on the Level?
Only use one that outputs 54.6V 3A and has the Aventon (older platform) plug. Never use a charger with a different voltage.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the e-bike, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Aventon Level?
Aventon's official store, eBay, or the other store listed above have the charger shown on this page.